Jokisch Fosia Skim S.M

1. The disc scimmer should only be attached to the coolant reservoir after the coolant was left for 2 hours or longer to ensure that the tramp oils had time to separat and have been deposited on the surface. 2. Attach the disc scimmer to the coolant reservoir so that the disc is submerged at a depth of 10 to 40 mm in to the liquid. The 2 joints give you a wide range of adjustment possibilities. The drain pipe with hose should always be sloped slightly downwards to ensure reliable skimming of the tramp oils. The collection container should have sufficiently large dimensions. 3. Either the machine can be switched on directly at the power supply or with the plug-in connector on the housing. You have the option of setting the voltage on the power supply in steps from 3 to 12 volts. The rotation speed increases as the voltage gets higher. We recommend to begin with level 6 (12 volts) when switching on, because the friction forces are still relatively high. After only a few rotations, the voltage and therefore the rotations per minute can be adjusted down to level 1 (3 volts), because the oil scimmer produces its best results at the slowest speed. 4. The period of use will depend largely on the volume of tramp oil. (It usually takes between 2 and 12 hours.) Longer operating times (e.g. at the weekend) are possible if you have provided a large enough collection container, so that inadvertent spilling is prevented.